Designed specifically for separation of a vehicle’s ball joint from the spindle support arm, the ABN Universal Ball Joint Separator – Remover Tool for Separating Arms, Tie Rods, and Ball Joints on Cars, Trucks, ATVs offers quick and easy operation. It is a universal tool that fits American and European cars, trucks, and even ATVs. Constructed from cast steel with a hardened steel pivot pin and jackscrew, this scissors-type tool can be used in the shop regularly and perfectly removes tie rod ends and lower ball joints without damaging the grease boots. It has a 9/10″ adjustable height and can be adjusted to 2 sizes for wider working areas and to accommodate various sizes and vehicles. The 1-1/8″ and 2-1/8″ maximum opening capacity accepts 3/4″ sockets or wrenches with a 4/5″ fork opening. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Product Features

• Practical: The ABN Universal Ball Joint Separator – Remover Tool for Separating Arms, Tie Rods, and Ball Joints on Cars, Trucks, ATVs is designed specifically for quick and easy separation of a vehicle’s ball joint from the spindle support arm
• Versatile: Universal; For use on both American domestic and European imported/foreign vehicles; For cars, trucks, and even ATVs
• Durable: Constructed from commercial-strength cast steel with hardened steel pivot pin and jackscrew for regular shop use
• Easy to Use: Slip the forked end between the boot and metal attachment point, be sure the pivot finger is squarely on the threaded end, and tightening the bolt until you have a good amount of resistance; Tap the attachment point and or the finger with a hammer and tighten some more and tap again; When the stud comes loose, it will be all at once as the tool falls free and you will hear a “pop”
• Specifications: 1-1/8″ and 2-1/8″ (30mm and 56mm) maximum opening capacity; Accepts 3/4″ sockets or wrenches; 4/5″ (20mm) fork opening; 9/10″ (48mm) adjustable height; Can be adjusted to 2 sizes for wider working areas and to accommodate various sizes and vehicles; Scissors-type design